Toyota - Lexus Nav Video TV Interface - GNET_RGB_TOYLEX

Go Back To G-NET Nav Video Module Vehicle Compatibility List

Connect A Video Input Such As A DVD Player, TV Tuner, Reverse Backup Camera, Video Game Console, iPod Video or Other A/V Source To Your Toyota - Lexus OEM GPS Navigation LCD Display Screen! G-NET TV Nav Video Modules Are Easy To Install, Activated For Video In Motion And Are Completely Plug & Play.

Model:

GNET_RGB_TOYLEX $259 USD Availability: In Stock GNET_RGB_REMOTE UNKNOWN Availability: UNKNOWN GNET_CAMERA3 Backup Camera $139 USD Availability: Not In Stock

Vehicle Compatibility:

Lexus ES300 (1999-2003) Lexus GS300 / 400 / 430 (2001-2004) Lexus GX470 (2003-2005) Lexus IS300 (1999-2004) Lexus LS400 / LS430 (1999-2006) Lexus LX470 (1999-2006) Lexus RX300 (1999-2003) Lexus SC430 (2002-2006) Toyota 4Runner (2003-2004) Toyota Avalon (2003-2006) Toyota Highlander (2003-2005) Toyota Land Cruiser (2003-2006) Toyota Prius w/Nav (2001-2005) Toyota Sequoia (2003-2004) Toyota Sienna (2003-2004)

Product Overview:

The GNET_RGB_X Nav Video module is our most popular product and it works with the majority of today's vehicles. This G-NET video module is the easiest way to interface a video source such as a DVD Player, TV Tuner, Reverse Backup Video Camera, iPod Video, Video Game Console, PC with composite output or other video source directly to your Toyota - Lexus OEM GPS Navigation LCD screen / LCD Display. The GNET_RGB_X features dual composite video inputs, one of which can be activated automatically when shifting the vehicle into reverse (usually used with a back-up camera), it also features complete control settings for brightness, color, tint and contrast, as well as a series of DIP switches that are configurable for each vehicle.

The GNET_RGB_X is an externally wired plug and play RGB converter interface that is installed inline of the GPS navigation computer in your Toyota - Lexus vehicle and LCD screen; it works simply by interrupting the RGB video signal from your GPS navigation computer when you flip a toggle switch, activate 12V on the reverse camera line or use the optional remote. When this occurs the GPS navigation system video image will be replaced by the video input that is connected to the GNET_RGB_X module. The optional wired remote available for this unit will allow you to switch between the navigation image, and up to two video sources connected to the interface module, as well as change the brightness, color, tint and contrast.

The GNET_RGB_X is a video only input interface module, which means an FM modulator, FM transmitter or CD changer audio input interface adapter needs to be used to connect the audio signal from your external AV source to your audio system if your vehicle does not have an auxiliary input already available. The GNET_RGB_X is video-in-motion enabled, so the video image will stay on the screen even with the car in motion (however we do not recommend or endorse this).

Vehicle Specific Installation Information:

This kit includes the GNET_RGB_X module and a plug and play wiring harness that features an OEM 10pin molex connector which plugs into the navigation system in the trunk or under the seat. You can view a photo of the wiring harness provided by clicking on the "View Module Wiring Harness" button below.

Simply plug the vehicles OEM wiring harness into one end of the wiring harness provided with the GNET_RGB_X module, then plug the other end of the GNET_RGB_X harness into the location where the vehicles wiring harness was. Then connect 12V power, ground, remote antenna lead, and backup camera connector (if required). The installation is really that simple! Since the unit is plug and play and only requires extra wiring for 12V and ground, it will not void your vehicles factory warranty! Please read our product disclaimer to ensure the safe use of our Nav Video modules.

Please note that the RGB unit works with any NTSC video output device and with most PAL devices, some European PAL DVD players and PAL TV Tuners have been reported incompatible resulting in a vertical shift of the image. However, many European video devices give the option to output in NTSC mode, eliminating any potential problems.

Optional Nav Video Accessories

Backup Camera With Night Vision (GNET_CAMERA3) - $139 USD Availability: Not In Stock

The G-NET Rear View Camera is ideal for use with the G-NET NavVideo line of video interfaces. Simply install the camera, connect the video signal to the G-NET NavVideo module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image. The night vision feature allows you to see whats behind you even in low light or no light environments. The G-NET Rear View Camera uses IR night vision and CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations. Image Sensor 1/3 inch CCD Electronic Shutter 1/30 (1/60) ~ 1/1000 CCD Pixels 512x492 Video Output 1.0 Vpp composite 75ohm Resolution 420 TVL Enhanced Operating Temp -20C - 50C Lens and View Angle 2.9mm Power Input DC 12V @ 200mA

 

Why The G-NET Nav Video RGB Unit Is Better The Our Competitors:

• Professionally manufactured board in a rugged black metal case.
• All adjustments are on the outside.
• 1 year warranty.
• High picture quality.
• Plug-And-Play wiring harness for easy installation into your vehicle.